|
Poly-Round®
Bearings
Solid polymer bearing insert with locking sleeve:
- cost effective and convenient
- thick bearing wall offers long life
- sanitary and cleanable
- predictable operation and wear
- non-corrosive
- non-conductive
- requires no grease after installation
- dimensionally interchange with all industry standard spherical bearings
- available in all inch and metric sizes
Materials for Poly-Round® bearing
|
NA:
|
moderate speed and load
good for impact and washdown environments
6,000 pv rating -40°F to 220°F
incidental food contact
color - gray
|
|
QF:
|
speed to 400 sfm; high load (call for details)
good for submerged or chemical location
good for high or low temperatures (with special bore)
60,000 pv rating
cryogenic to 500°F
incidental food contact
color - black
|
|
FA:
|
not affected by chemical, moisture, or impact
good for submerged oil or chemical locations involving edible products
6,000 pv rating
cryogenic to 500°F
direct and continuous food contact approved
color - white
|
|
PA:
|
low speed and load
excellent for submerged or chemical
1,000 pv rating
cryogenic to 150°F
direct food contact approved
color - white
|
|
All-Round®
Supreme Bearings
Stainless steel inserts with
replaceable flanged polymer bearing:
- dimensionally interchange with all industry standard spherical bearings
- non-conductive
- require no grease after initial installation
- sanitary and cleanable
- corrosion resistant
- predictable operation and wear
- cost-effective and convenient
- reusable components
- spherical or ER-style
- outer race available in 304 or 316 ss
- available in all inch and metric sizes
Materials for All-Round® flanged bearing
|
QB:
|
moderate speed and load
good for impact and washdown environments
6,000 pv rating -40°F to 220°F
incidental food contact
color - gray
|
|
QF:
|
excellent price-to-performance
not recommended in submerged or high-salt or extreme pH locations
50,000 pv rating
cryogenic to 550°F
|
|
QF:
|
speed to 400 sfm, high load (call for details)
unaffected by any chemicals at temperatures below 400°F
60,000 pv rating
cryogenic to 500°F
incidental food contact
|
|
All-Round®
Supreme Bearings
choose ball bearings for applications where plane bearings are not recommended:
- high speed locations fans, pumps, saws/knives
- overhung loads
- tension locations flat belts, Eagle belting, V-belt drives
- trunnion devices
Choices of:
- re-greasable lubricated with food grade grease
- operating range -40°F to 300°F
- high temp grease to 400°F
- solid-lubricated (grease-less) with either of two kinds of lubrication:
- for chemical resistance, very low friction, temperature extremes (specify -250°F to 650°F), vacuum locations
- oil-filled polymer to block contaminants into bearing at ambient temperatures (food-grade; wet or dry)
|
|
Choose ball bearings instead
of PLANE BEARINGS
in these applications
- high tension (flat belt conveyors, urethane belts, V-belt drives)
- high speed devices (fans, pumps, table top conveyors)
- overhung loads (shaft mounted gear reducers)
- trunnions
|
- stainless available in inch & metric sizes to 2-7/16";
- non-corrosive treated available to 90 mm
- 400-series ss for maximum strength
- 300-series ss for maximum corrosion resistance
|
SELECT THE BEST EDT INSERT FOR THE ENVIRONMENT